Jet Hand Dryer

HEPA cleaning instructions:

1. Unscrew the screw of the filter holder by hand until the screw is completely separated from the machine body;

2. Pinch the screw head by hand and pull it down (because of the filter, it is normal if you feel a little tight);

3. After the filter frame and filter are rotated 90° to the right, pull down the filter to clean or replace the filter;

4. When the filter is installed, tightening the filter to the bracket if you feel tight.

Water tank cleaning instructions:

1. Material of water tank is made of stainless steel.

2. Before pulling out the water tank, gently press the water tank, the water tank will pop out about 3cm, then take out the water tank and make leaning and disinfecting.

3. Pushed it to the end before install the water tank.